Operation Steps of Schober T106 Abrasion Tester

The Schober T106 abrasion tester adopts the rotational wear test method and is mainly used to test the wear resistance of automotive interior materials. complete.

Complies with:

DIN 53863 Part 2 \"Abrasion Test of Textile Surfaces (Rotational Wear Test)\", GME Standard 60345, GMW Standard 3283, VW /Audi Zentral-Norm PV 3908

Operation steps:

1. First prepare the accessories and test samples;

2. Place the prepared sample in the device and squeeze it to secure;

3. Fix the clamping device to the loading table with the friction head;

4. From the side of the instrument, open the hidden compartment, take out the weight and load the weight onto the instrument;

5. Lower the upper pressure device to make the friction head come into contact with the sample;

6. Open the switch of theinstrument to enter the LCD screen operation interface;

7. Set the total rotation and unidirectional rotation value;

8. Start and rotate the friction between the sample and the friction head;

9. When the rotation set point is reached, the instrument stops automatically and fixture is removed;

10. Disassemble the device and the sample is removed;

11. Testing the instrument At the end, samples are taken for analysis and comparison to assess the wear resistance of the material.

Shanghai Fanbiao Textile Testing Technology Co., Ltd., as an enterprise integrating R&D, manufacturing, sales, training and service, is committed to providing more testing instruments in the market, providing long-term textile and leather products, Combustion, automotive interior materials, environmental weathering, masks and protective clothing.e protection and other test instruments, non-standard customization is also acceptable, and targeted testing can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.

Prev: T109 Multifunctional Scratch Instrument Operation Steps