The hydraulic burst strength tester is a test equipment independently developed and produced by our company qisnun Precision Electromechanical Technology Co., Ltd. This is a cost-effective and comprehensive after-sales service. It is used to test the top of woven, knitted, non-woven, paper or cardboard fabrics. Bursting force and height, using hydraulic explosion method, equipped with PC-side control software, easy to operate, can analyze and print test results, support all standard requirements for areas of test and the requirements of different standards.
Meets Standards:
ASTM D3786; ERT 80-4-20; GB/T 7742.1; BS EN ISO 13938-1; BS 3424-6-B; ISO 3303-B; ISO 2758; ISO 3303.2; ISO 3689; JIS L1018 L1093; IWS TM170; FZ/T 75003-1993.
Main parameters:
1. Elastic diaphragm size: outer diameter Φ80mm, thickness 0.9±0.1mm;
2. HighBurst ur: 70±0.02mm;
3. Burst Time: 99.9±0.1s;
4. Hydraulic Oil: Glycerin 85%, Distilled Water 15%.
Precautions:
1. Switching sequence:
Due to the hydraulic pressure burst The strength machine is controlled by the microcomputer control software, and it should be ensured that the software is not closed when the test machine is turned on.
1. Startup: turn on the microcomputer (computer), turn on the control software, turn on the power of the test machine.
2. Shutdown: Turn off the power of the test machine, turn off the control software, and turn off the power of the microcomputer (computer).
2. The indication value is not displayed:
Please check whether the connection lines of the test machine and the host computer are properly connected, and ensure sure that there isno virtual connection.
3. Pay attention to details:
1. The key parts of the testing machine (such as jaws, gearbox, etc.) should be filled frequently of lubricating grease.
2. The computer should be placed in a dry and ventilated room.
3. If it is not used for a long time, it should be powered on once a month.
Four. Daily maintenance:
The main power of the hydraulic cloth bursting instrument is the hydraulic press. Maintenance Steps: Replace hydraulic oil first, then open all air hoses and blower air pressure. Insert the air pipe into the fan, clean the internal cavity of the hydraulic testing machine, and clean the waste oil and dirt inside.
Shanghai Fanbiao Textile Testing Technology Co., Ltd.As an enterprise integrating R&D, manufacturing, sales, training and le service, it is committed to providing more test instruments in the market, providing long-term supplies of textiles, leather, combustion, automotive interior materials, weather aging, masks Non-standard customization is acceptable for test instruments such as protective clothing, and targeted tests can be carried out as required before purchase to ensure that the purchased instruments are suitable.
Prev: Test the speed and stroke of the universal wear performance tester
Next: Test the speed and stroke of the universal wear performance tester