Terms of Use of Battery Weight Shock Test Machine

The battery weight impact testing machine test sample battery should be placed on a plane, a rod with a diameter of 15.8 mm (5/8 inch) is placed in cross in the center of the sample and a weight of 9.1 kg or Weight of 10 kg Dropping objects from a certain height (61 cm or 100 cm) onto the sample is independently developed and produced test equipment by our company qisnun Precision Electromechanical Technology Co., Ltd., with high cost performance and comprehensive after-sales service.

Complies with standards:

UN38.3, SJ/T11169—1998, SJ/T11170—1998, UL1642: 1995, UL2054: 1997, QC/T 743-2006, QC / T 742-2006, QC/T 744-2006, GB/T18287-2000, GB 8897.4-2002, idt IEC60086-4:2000 and other standards.

Specifications:

1. Drop ball weight: 9.1 kg ± 0.46 kg ( 20±1lb) or 10Kg

2. Impact height: 610mm or 1000mm (can be customized according to differentcustomer needs)

3. Impact method: lift the falling ball to a certain height and release it, and the falling ball will fall in the vertical direction Free fall, no tilt, no jerk

4. Horizontal bar: 15.8mm (5/8 inch) steel rod

5. Inner box material: SUS#304 stainless steel plate

6. Outer box material: galvanized sheet baking paint treatment

7. Compression: 1 piece of silicone foam compression

8 .Air outlet: located 150mm from rear of cabinet

9. Cabinet door: single door, double door, viewing window open (tempered glass), handle door lock cold

Conditions of use:

1. Operating voltage: 220V±10% 50HZ

2. Operating environment: use allowed at 0~30℃

3. Guaranteed performance environment: 5~25℃

Prev: Battery Combustion Test Machine Experimental Description