About Taber Abrasion

Scope: Taber abrasion is a test to determine a plastic's resistance to abrasion. Resistance to abrasion is defined as the ability of a material to withstand mechanical action such as rubbing, scraping, or erosion. Abrasion can be difficult to compare but haze variation or weight loss are often evaluated. Test Procedure: The haze or original weight of test specimen is measured. The test specimen is then placed on the abrasion tester. A 250, 500, or 1000-gram load is placed on top of the abrader wheel and allowed to spin for a specified number of revolutions. Different abrading wheels are specified. A haze measurement or final weight is taken. The load and wheel can be adjusted for softer and harder materials. Specimen size: 4-inch diameter disk or 4 sq. inch plate A ¼ inch diameter hole in center is required.